The Nauticus Canal Cruiser

Thanks Rich, PM sent. Please reply by PM as I don't get on this forum that often.

Regards, Kevin.

Sorry its been a while but I have been busy working on my boat, the socket on the inside ( pictured a bit further up the thread) does not work on my boat it is solid so I decided to leave it that way, I was told that spares are no longer available for this mechanism by Sillette. if you look at the p...

Hi, is there anything specific you need to know about the outdrive? I have a Transa-Drive fitted to my boat and had a hard time finding info on it. I joined this forum and obtained a manual from here, I have since managed to fit new prop shaft seals and renewed the steering swivel that was siezed, I...

Hi Rich,
There are four props on ebay at the moment all from the same seller Bill Higham Marine, (search for "enfield propeller") there are two R/H and two L/H. if you want to go for a repair you could try this: http://www.castlemarine.co.uk/aboutus.htm

Regards, Kevin.

Thanks for the info Keith, I think I am going to have to bite the bullet on this one and dismantle it and see what happens, I can't believe how little information there is about these drives, thanks for replying.

Hi again, I still have not solved my Transa-Drive problem, and this being the only place that appears to have anyone who knows anything about them I thought I would try one more time. The steering swivel has only very little movement, probably about 10 degrees it moves freely for this limited amount...

Hi ray is yours a Transa-Drive or an Enfield?

Thank you for your quick reply Ray, I am at the boat on Friday so I will give it another good looking at. My boat is out of the water at present so its all nice and clean no slime to clean off, Thanks again for the info.

Cheers, Kev.

Hi Ray, I was just reading about your problems with the Transa-Drive, and you say you pulled a spring loaded pin to wind up the leg, could you tell me where this is please this is the socket to wind up the leg, is the pin on here somewhere? you also say you drained the oil through the sump screw, wh...

Thanks Phil you have been a great help, I owe you one.

Regards, Kev.